Standard Features | Optional Features

Standard Features

MultiSpread 220 Compost Top Dressing Spreader
Standard Features

Ground Drive System

Dual wheel ground drive system runs belt and beaters off wheel speed, allowing consistent spread at various speeds.

Widespread Beater

Our patented “Widespread Beater” is designed to spread a variety of wet or dry materials up to 54 inches (137.16 cm).

Adjustable Engage Lever

The engagement lever is adjustable to facilitate ease of use by the operator. Two wing nuts allow the handle to extend for easier reach for a variety of machines.

Full Width Belt

A 23-inch wide PVC belt delivers dry or moist material evenly and smoothly to the “widespread beater.”

Adjustable Tongue

The tongue has five adjustment holes to accommodate a variety of towing vehicles. The hitch pivots to ensure the unit follows the contour of the turf.

Rear Shroud

The rear shroud is adjustable in four different positions to adjust material spread for varying conditions*
(Adjustable wing kit optional to control spread width)

Cleanout Ports

Each unit has factory cutouts in the side for easy cleaning access. These are ideally pressure washed after each day/job. Doing so will avoid material buildup in between the belt and roller.

Adjustable Endgate

A locked position, adjustable dial controls the spread depth for fine tuned topdressing. Since the belt is tied to ground speed, it typically allows for up to 1/4" thick spread in one pass.

Optional Features

Light Material Sides

Increase the capacity to just above 1 cu. yd. Designed for use with lightweight materials such as compost, crumbed rubber, and calcined clay. Fully loaded weight should not exceed 1,500 lbs. The sides have an 69″ inside dimension and are ideal when loading with a 5 ft. bucket or smaller.

Wing Kit

The optional wing kit allows operators to control the spread pattern by moving one or both wings inward. This is ideal for a smaller spread trail with heavier spread or more consistency in a gardening or leveling application.

Loading Chutes

The optional loading chutes increase the loading width to 68-inches (from 57-inches) to reduce spillage when loading with a tractor or small skid steer loader.

Electric Engage/Disengage Actuator

The 220 is available with a 12V plug and electric actuator for engagement from a cab, or further than an arms reach. This setup is ideal for Side-by-Side utility vehicles and Zero Turn mowers where reaching back is unrealistic for the operator.

Narrow Ag Tires

For a farming, or narrow application with more needed traction, an ag tire set is available instead of wide turf tires. These tires are 6″ wide instead of 10″ and provide more traction with a narrow footprint.

220 Spreader Specifications

Capacity (Heaped)	15 cu. ft. or 1/2 cu. yd. (0.42 m3)
Capacity w/ LMS Option (Heaped)	27 cu. ft. or 1 cu. yd. (0.75 m3)
Max Load Weight	1,725 lbs. (783 kg)
Box Width	23.5 inches (59.7 cm)
Box Length	57 inches (144.8 cm)
Total Height	37.5 inches (95.3 cm)
Total Width (Turf Tire)	48 inches (121.92 cm)
Total Width (Ag Tire)	44 inches (111.76 cm)
Ground Clearance at Axle	8 inches (20.32 cm)
Total Length	99.3 inches (252.1 cm)
Spread Width	Up to 54 inches (137.16 cm)
Spread Thickness	Up to 0.25 inches (0.6 cm)
Spread System	Widespread Beater
Weight w/ Tires	475 lbs. (215.5 kg)
Tire Size	20.5 x 8.0-10
Movement	Pull-Type
Drive	Ground Drive (Double Wheel)
Required Power	16 HP (12 kW)
Build	12/16 Ga. Bolted Steel, 2-Part Epoxy

Earth And Turf MultiSpread-220 Initial Review

Hey there, this could be a bit long winded..you’ve been warned. So I have 3-4 acres with so-so topsoil, I was interested in slowly building up my soil so that I could have a healthier, more resistant lawn for our business. This is our second year of having a lawn (new construction) and our first… Read more “Earth And Turf MultiSpread-220 Initial Review”

Locke Lamora

www.lawnsite.com/threads/earth-and-turf-multispread-220-initial-review.482381/

MultiSpread™ 220